Make Sure You Know How To Repair Rot And Decay On Wooden Windows

Timber structures of windows that are damaged is the perfect place for dry rot to manifest itself. If this does occur the wood can be seriously affected. Living in a very humid climate increasing the likeliness of this happening. Then it is good to know how to repair rot and decay on wooden windows.

Dry rot is caused by the spores of fungi attacking a damaged spot in the wood. They send their filaments deep into the wood, sucking out moisture, eating away at the wood and multiplying. The wood dries out and shrinks. The spores cause structural damage to the wood. The result over time is severe decay.

The sooner dry rot is found and dealt with, the less expensive and simple it will be stop further destruction. The affected parts can be treated with borates and epoxy. These substances work by stabilizing wood in the problem areas. Prevention is better than cure and there are a few ways this can be done.

You can be certain that dry rot will become a problem if it finds the perfect conditions. These are wood, a damp area, the right temperature and a supply of oxygen. You cannot change the weather, but you can deprive the attackers of one of these elements. If you can make sure that there is no moisture coming into contact with wooden window frames, window sills or shutters, you have closed the door to dry rot.

It is important that you ensure there are no gaps or cracks that allow moisture in. You will also need to check on the condition of the wood for early signs of decay. If there is discoloration this could be signal of dry rot setting in. A further sign is a dry red powder around the wood. This indicates that action is needed to prevent more destruction.

To treat the problem you will need previously treated wood, a drill, a supply of epoxy resin and either fungicide or borate. It is also necessary to increase the amount of ventilation. Then you are ready to go. Now you tackle the real problem by applying borate or fungicide. This is a sure way of killing off any rot. This is only effective if there is no water to wash off the treatment.

Any tiny areas on the wood that show signs of rot will need some holes drilled in. Epoxy resin is then poured into the openings. If the damage is severe, it will have to be replaced with the treated timber.

There are more than one way to treat for dry rot, but this is usually quite effective. The secret is to remember wood and humidity equals trouble, especially if you do not know how to repair rot and decay on wooden windows.

Discover just how easy it is to repair rot and decay on wooden windows. You can get comprehensive information about how and where to find reliable suppliers of sash windows in the United Kingdom online, now.